| |
HEAD PROTECTION |
EAR PROTECTION |
FACE PROTECTION |
HAND PROTECTION |
EYE PROTECTION |
INDUSTRIAL HAZARD |
FEET PROTECTION / |
FALL PROTECTION /
FULL BODY HARNESS |
BODY PROTECTION |
CHEMICAL/ OIL SPILL KITS |
RESPIRATORYPROTECTION |
KIMBERLY-CLARK HYGIENE / WORK PLACE WASH ROOM PRODUCTS |
LOCK OUT / TAG OUT |
WORK WEAR |
SUPPLIED AIR RESPIRATORS / SCBA |
GAS DETECTION |
MOTION SCOUT |
THERMAL IMAGING CAMERA |
| |
- :Contact Details :- |
Jennifer Nazareth
A-2, II Floor, Sai Ashish CHS,
Next to Bindra Complex,
Mahakali Caves Road, Andheri East,
Mumbai - 400093
Maharashtra, India.
Tel/Fax: +91 22 66796987 / +91 22 66919392
Cell No: +91 9867707419
Website : www.labsafety.in
E-mail:- response@tobitengineers.com |
|
|
|
|
| |
|
| |
RESPIRATORY PROTECTION |
| |
|
| |
 |
V-500 Face-piece Respirators, V-7500
Chemical Filter |
| Half mask Face-piece in soft TPE material
(Thermoplastic Elastomer) in Grey colour material. Produced from
non-allergic, Soft & odourless material to ensure high comfort. Exhalation
valve to allow efficient escape of exhaled air containing CO2. Suitable for use
with V-7500 type replaceable chemical Filter |
| |
 |
V-800 Face-piece Respirators, V-7800
Chemical Filter |
Half mask Face-piece in soft TPE material
(Thermoplastic Electrometric) in grey colour. It is equipped with dual
filter which ensures better breathing comfort. Pull type strong, adjustable
elastic gives snug fit yet relives strap pressure. Head support gives even
weight distribution & leak-proof fitting. Braided elastic, high skin comfort
while in use in tough conditions. |
| Broad Elastic with front pull adjustable
buckles |
| Suitable for V-7800 type replaceable
chemical Filter equipped with Dual filter, ensures better breathing comfort. |
| |
 |
V-666 Full-face piece Respirators FOR
V-776 / V-76 Filter |
Face-piece in Neoprene / Silicone material.
Light in weight Easy to use & well balanced. ( IS 14166:1994). Produced
from non-allergic, Soft & odourless material to ensure high comfort. Wide
field of vision with scratch & chemical resistance. Full face-piece neck
strap is made from hard neoprene rubber, which helps to hold the face-piece in
neck while not in use. |
| |
 |
V-410 FFP1 S Comfort Fold Flat Style
Respirator |
 |
V-410-V FFP1 S Comfort Fold Flat Style Respirator :
Ultrasonic welded to form composite filter
without needle holes. Stitched adjustable braided blue elastic head bands. (IS
9473:2002 Approved). Available in Yellow / Grey colour. |
| |
 |
V-410-SLV FFP1 Fold Flat Style Respirator
with exhalation valve. Adjustable braided
elastic head bands stitched outside of the filter area. (Approved EN 149:2001).
Available in Yellow colour. |
| |
 |
V-210-SL FFP1 Universal Cup style
Respirator
Adjustable braided elastic head bands
stitched outside of filter area. (Approved EN 149:2001) |
| |
 |
V-210-SLV FFP1 Universal Cup style
Respirator
One way exhalation vent valve. Adjustable
braided elastic head bands stitched outside of filter area. (Approved EN
149:2001) |
| |
 |
V-420-SL FFP2 comfort Fold Flat Style
Respirator
Stitched adjustable braided elastic head
bands. (Approved EN 149:2001) |
| |
 |
V-420-SLV FFP2 Fold Flat Style Respirator
With exhalation valve. Stitched adjustable
braided elastic head bands. (Approved EN 149:2001) |
| |
 |
V-230-V FFP3 SL Premium cup style
Respirator.
Three panel design, Large surface area, fits
under face shield. One way Exhalation vent valve . Full seal for secure
comfortable self fit. Broad Elastic with front pull adjustable buckles. (IS
9473:2002 Approved) |
| |
 |
V-430-SLV FFP3 Fold Flat Style Respirator
With light weight, one way exhalation vent
valve. Stitched adjustable braided blue elastic head bands. (Approved EN
149:2001) |
| |
 |
V-414-SLOV FFP2 Fold Flat Style
Respirator
|
| |
 |
LOV FFP2 Fold Flat Style
Respirator
Carbon layers helps in removal of odour. One
way Exhalation vent valve. (Approved EN 149:2001) |
| |
 |
V-410-V FFP1 S Comfort Fold Flat Style
Respirator Ultrasonic welded to form composite filter
without needle holes. One way exhalation vent valve. (IS 9473:2002 Approved). Available
in Yellow / Grey colour. |
| |
 |
V-300-V FFP1 S Road Master for Road
Pollution Unique grid supported style, low profile.
adjustable head elastic head band. (IS 9473:2002 Approved). Available in Light
Blue Colour. |
| |
 |
V-20-V FFP2 S Comfort Cup Style
Respirator
with soft inside layer and coarse dust
filters. One way exhalation vent valve. Stitched adjustable braided red elastic
head bands. (IS 9473:2002 Approved). Available in White / Grey colour. |
| |
 |
V-90-V FFP2 S Deluxe Cup Style
Respirator
with net reinforcement for shape retention
over extended periods. One way Exhalation valve. Nose seal contoured for easy
quick comfortable fit. (IS 9473:2002 Approved) |
| |
 |
V-820-V FFP2 SL Premium Large Cup Style
Respirator
Full seal for secure comfortable self fit.
One way Exhalation vent valve . road Elastic with front pull adjustable
buckles. (IS 9473:2002 Approved) |
| |
| Compressed Air Escape Device |
 |
 |
 |
|
S CAP AIR |
RESPIHOOD |
SMOKE HOOD |
|
S-Cap-Air :
The S-Cap-Air is a hooded constant flow, breathing apparatus to escape from areas in which toxic substances or oxygen deficiency may occur. Simply open the unit, don the hood and make your escape.
Certification EN 1146 Duration: 15 minutes. SOLAS approved for use aboard ships. |
|
RespiHood :
Rescue hood with constant air flow to safe people out of dangerous atmospheres using the second medium pressure connection on a BA. RespiHood for standard couplings, RespiHood
F for Stäubli couplings.The hood is stored in waterproof pouch on hip belt and flame retardent material for pouch and hood . |
|
Smoke Hood :
The MSA Smoke Hood is an emergency escape respirator designed in particular for the offshore oil industry. The well visible orange hood provides protection against radiant heat, the neck seal protects from smoke penetrating into the hood. |
| ► Self-adjusting head harness
► Elastic neck seal
► Simple and quick donning and use
► Safe protection of breathing, eyes and head
► Large field of vision |

|
S-Cap |
It has been proven that most victims during dramatic circumstances due to a fire do not get injured by heat or flames but from smoke and gases. S-CAP is an escape hood especially designed to protect persons endangered by smoke and gases generated by fires. The most dangerous of them is carbon
monoxide. S-CAP provides an effective protection for eyes, head and especially the respiratory tract, and thus persons can rescue themselves with little risk.
The smoke hood S-CAP features a clearly visible bright yellow hood fitted with a wide lens allowing a large field of vision. Inside the hood, a nose cup gives a perfect adaptation to a wide variety of head and face sizes and is directly connected to a multipurpose filter with a broad protection range, including
carbon monoxide. For a better respiratory comfort, the hood is also equipped with an exhalation valve.
The adjustable head harness located on the outside of the hood is directly attached to the nose cup. Once tightened, the hood fits the head closely. The hood material, as well as the harness and the lens, are resistant against heat and short flame contact. EN 403 Duration: 15 minutes |
|
Full Face Masks
MSA´s expertise in breathing protection becomes very visible in the range of the full face masks. Comfort and quality, useful accessories and an unbelievable range of filters meet every challenge put up by hazardous gases. |

|
3S Full Face Masks |
The MSA 3S full face mask, the most successful mask design in the world with over 5 millions units sold, has been upgraded. It offers even more user comfort and value, without changing the 3S Classic style! A softer face seal, enlarged harness attachment areas, a deeper chin cup combined with the proven classic design, the MSA 3S improves its efficiency whilst remaining one of the user’s favourite full face masks. EN 136 class 3 |
|
Ultra Elite
Applying the latest state-of-the-art in mask technology, the MSA Ultra Elite Full Face Mask creates a new standard of quality, directly inspired by its predecessor – the MSA 3S.
Combining practical experience with modern design, it provides a higher level of performance in respiratory protection. Ultra Elite was developed in close cooperation with many fire services and large industrial organisation for use in normal and positive pressure modes.
All Ultra Elite masks are approved according to EN 136 class 3. |
|
3S Basic Plus
The 3S Basic Plus is provided for use with respiratory protective filters [screw-type filters with thread to EN 148-1], assisted and non-assisted fresh air breathing apparatus, air-line systems and Powered-Air-Purifying-Respirators.
It is not approved for use by fire departments or as face piece in combination
with compressed-air breathing apparatus [certified to EN 136, Class 2]. |
|
| |
|
| |
Airline Breathing Equipment : Heavy duty airline equipment for use in industry, construction, tank cleaning. |
| |
 |
 |
 |
Compressed Airline Breathing Apparatus
Compressed airline breathing apparatus independent from the ambient atmosphere. To be used in areas where the ambient air is irrespirable or oxygen deficient. Modular system with wide choice of accessories to meet individual requirements. |
Cavair AL
The Cavair AL offers protection from hazardous vapors, gases, particles, chemicals, paint sprays and splinters. It is a light hood with visor and head gear, breathing air is supplied via a compressed airline and a regulating valve. |
Sandblast Cap Light
The Sandblast Cap Light is the right choice for sandblasting with its lens sieve and shoulder/ chest cover. |
|
| |
|
| |
Air-Purifying Respirators (APR) |
| |
A wide range of full face masks, half masks, filtering facepieces, hoods and visors, in combination with filters and turbo devices giving the user the best choice in selecting the best protection according to the relevant European Norm. |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|