| |
HEAD PROTECTION |
EAR PROTECTION |
FACE PROTECTION |
HAND PROTECTION |
EYE PROTECTION |
INDUSTRIAL HAZARD |
FEET PROTECTION / |
FALL PROTECTION /
FULL BODY HARNESS |
BODY PROTECTION |
CHEMICAL/ OIL SPILL KITS |
RESPIRATORYPROTECTION |
KIMBERLY-CLARK HYGIENE / WORK PLACE WASH ROOM PRODUCTS |
LOCK OUT / TAG OUT |
WORK WEAR |
SUPPLIED AIR RESPIRATORS / SCBA |
GAS DETECTION |
MOTION SCOUT |
THERMAL IMAGING CAMERA |
| |
- :Contact Details :- |
Jennifer Nazareth
A-2, II Floor, Sai Ashish CHS,
Next to Bindra Complex,
Mahakali Caves Road, Andheri East,
Mumbai - 400093
Maharashtra, India.
Tel/Fax: +91 22 66796987 / +91 22 66919392
Cell No: +91 9867707419
Website : www.labsafety.in
E-mail:- response@tobitengineers.com |
|
|
|
|
| MSA Portable Gas Detection Instruments |
In order to evaluate how much the human being is endangered by hazardous substances in the ambient air or explosive mixtures of gases and vapours in the air, appropriate measuring instruments can be used to recognize, measure and monitor dangerous concentrations. |
|
ALTAIR 5X |
 |
 |
CERTIFICATIONS: UL Class I, Div. 1, Groups A,B ; C&D Tamb=-40°C to +54°C ; UL Class II, Div.1, Groups E,F&G ; Class III, Div. 1 Tamb=-40°C to +54°C; T4; ATEX II 1G Ex ia IIC T4, -40°C to +60°C, IP67
(Zone 0 with no combustible sensor installed); II 2G Ex ia d IIC T4, -40°C to +60°C, IP67 |
|
The ALTAIR 5X can measure up to six gases simultaneously and can be fitted with a wide range of both toxic and infra-red sensors, providing the flexibility required to meet most applications. |
| |
MSA XCell Sensors
► New exotic SO2, Cl2, and NH3 sensors for expanded monitoring applications
► Sensor response and clear times under 15 seconds for most common sensor configurations
► Bump test in less than 15 seconds for most common sensor configurations
► Span calibration time of 60 seconds for most common sensor configurations
► All XCell Sensors are capable of plug-and-play capabilities for easy reconfiguration
► Typical life greater than four years for combustible, O2, and CO/H2S sensors
► Proprietary operating mode of the combustible sensor helps it stand up to poisons over the life of the sensor
► End-of-sensor-life warning gives advanced notice to user, reducing service outage |
| |
MotionAlert feature :
► Triggers an alarm if the user remains motionless for 20 seconds, indicating possible "man down" |
| |
InstantAlert feature :
► Allows users to manually activate all alarms to alert others to a potentially hazardous situation |
| |
Triple alarm system :
► Clear visual, audible and vibration alarm notification |
| |
Large LCD :
► Clear, easy and concise readings at a glance |
| |
24 hour bump-test checkmark :
► Confirms the detector recently passed a gas response check |
| |
Rugged rubberised housing :
► Withstands 3 m drop |
| |
IP R65 rated by third party :
► Resists water and dust ingress |
| |
Li-polymer battery :
► Optimum usage time (18 hrs) with minimum charging time means you can buy fewer instruments to cover long shifts |
| |
Glow-in-the-dark case (optional) :
► Allows high visibility, increasing the safety at confined spaces, mining and other dark environments |
| |
QuickCheck Test Station compatible :
► Allows automatic bump testing of unit with a simple PASS or FAIL indication, helping to reduce human error. All test records are stored and can be retrieved as needed using MSA Link Software |
| |
MSA Link Software-compatible :
► When connected to MSA Link Software, all stored records can be accessed. Print capability for calibration reports, alarm set point changes etc. is offered in multiple languages |
| |
Event log/data log :
► Records up to 500 events for a quick overview of calibration records and alarms. If more details are required, a full data log can be assessed |
| |
Ergonomic design with large rubberised buttons :
► Ensures easy operation, even with gloves |
| |
MSA XCell Sensors :
► Lower cost of ownership due to less gas required (faster calibration and bump check times) and longer sensor life
► 3-year standard warranty (up to 4 years, optional |
| |
GALAXY System compatible :
► Allows for automatic testing, calibration, and recordkeeping for up to 10 units simultaneously, helping to reduce human error |
| |
Auto calibration :
► Saves time and calibration gas by calibrating all sensors simultaneously |
| Next |
| |
|